This page was last updated on: May 10, 2010
Current Production Version 1.3.0.0
| Revision No. | Description | Date Logged | Status |
| 064 | Beta Test Comments v1.2.0.0 - Analysis Runs Should Provide Warning When Minimum End / Edge Distance is Violated | 11/15/2007 | v1.2.0.0 |
| 063 | Beta Test Comments v1.1.5.0 - Incorrect DC2 and FWS Load Factors for STR1P | 10/09/2007 | v1.2.0.0 |
| 062 | Beta Test Comments v1.1.5.0 - Oversize Hole Affects Minimum End Dist & Minimum Pitch | 10/03/2007 | v1.2.0.0 |
| 061 | Designed splice shows web specification check failure | 08/13/2007 | open |
| 060 | Oversize Hole Affects Minimum End Distance and Minimum Pitch | 06/19/2007 | v1.2.0.0 |
| 059 | Connection Type Bearing causes Crash when all output selected | 04/25/2007 | v1.2.0.0 |
| 058 | Designed splice shows flange specification check failure | 04/19/2007 | v1.2.0.0 |
| 057 | Problem with maximum gage calculation | 03/08/2007 | v1.2.0.0 |
| 056 | Use Updated License File | 02/01/2007 | v1.2.0.0 |
| 055 | BETA TEST COMMENT: Update SPLRFD to IVF 9.1 | 01/10/2007 | v1.2.0.0 |
| 054 | Update RUN.INI and HELP.INI files | 12/08/2006 | v1.2.0.0 |
| 053 | Continue Input Range Checking for Remainder of Input Line After Error | 09/25/2006 | v1.2.0.0 |
| 052 | Implement Oversize Holes | 08/02/2006 | v1.2.0.0 |
| 051 | Convert DIGITAL/PADIGITAL to INTEL/PAINTEL | 04/19/2006 | v1.2.0.0 |
| 050 | Eliminate requirement for permit load for pedestrian runs of the program | 03/16/2006 | v1.2.0.0 |
| 049 | Eliminate the need for negative flexural capacity input for simple spans | 03/16/2006 | v1.2.0.0 |
| 048 | Modify SPLRFD to use concurrent live load effects | 03/16/2006 | open |
| 047 | Combine pedestrian and non-pedestrian runs into a single program run | 03/16/2006 | v1.2.0.0 |
| 046 | Program crash with 0.0 vehicle live load and pedestrian load | 02/10/2006 | v1.2.0.0 |
| 045 | Implement changes to allow for input lines > 256 characters | 11/03/2005 | v1.2.0.0 |
| 044 | Intel Visual Fortran program conversion | 08/10/2005 | v1.1.1.0 |
| 043 | Update contact information in problem report file SplrfdRevReq.dot | 08/10/2005 | v1.1.0.0 |
| 042 | Output values not aligned with column headings | 07/19/2005 | v1.1.0.0 |
| 041 | Eliminate runtime warnings from example input files | 03/31/2005 | v1.1.0.0 |
| 040 | Eliminate runtime warnings from example input files | 03/08/2005 | v1.1.0.0 |
| 039 | Automatically update date and time for PD file | 08/23/2004 | v1.1.0.0 |
| 038 | Add caption text to EngAsst image files | 07/14/2004 | v1.1.0.0 |
| 037 | Check if any temporary files are made, and if so, create them in the TEMP directory instead | 05/24/2004 | v1.1.0.0 |
| 036 | Increase left and right flange edge distances on FSB command | 01/16/2004 | v1.2.0.0 |
| 035 | Add version resource information to DLL and EXE and retrieve it | 12/05/2003 | v1.1.0.0 |
| 034 | Adding Long File Names To LRFD programs | 11/17/2003 | v1.1.0.0 |
| 033 | Convert the SPLRFD Program to DLL | 10/27/2003 | v1.1.0.0 |
| 032 | Specification Check Warnings | 10/16/2003 | v1.1.0.0 |
| 031 | Repeated information in design trials tables | 10/15/2003 | v1.1.0.0 |
| 030 | Update Engineering Assistant Configuration files for SPLRFD version1.0.3.0 | 10/02/2003 | v1.1.0.0 |
| 029 | Program crahses for the given Input | 08/07/2003 | v1.1.0.0 |
| 028 | Investigated problem with 'design moment' distribution between DC1, DC2, FWS and Live Load | 06/05/2003 | v1.1.0.0 |
| 027 | Compile SPLRFD v1.0 using Compaq Visual Fortran for Windows XP Compatibility | 03/11/2003 | v1.1.0.0 |
| 026 | Question about web splice plate length in the analysis output | 02/21/2003 | v1.1.0.0 |
| 025 | Remove references to SPLRFD.DBG from the User's Manua | 11/04/2002 | v1.1.0.0 |
| 024 | SID command modification for APRAS | 03/26/2002 | v1.1.0.0 |
| 023 | Provide default values for ETA of 1.0. Update the PD file and users manual | 03/22/2002 | v1.1.0.0 |
| 022 | Investigate adding separate input for dynamic load allowance for P-82 vehicles as per SOL 431-01-07 | 10/26/2001 | v1.1.0.0 |
| 021 | Investigate why program prints a warning for the FSB command for non-staggered cases | 09/26/2001 | v1.1.0.0 |
| 020 | Under certain circumstances number of bolts for flange splice is not a multiple of the number of gage lines | 09/26/2001 | v1.1.0.0 |
| 019 | Investigate if program should indicate failure when absolute value of stress exceeds flexural resistance | 09/26/2001 | v1.1.0.0 |
| 018 | Investigate if gage distance requirement should be changed to 24 times the thickness | 09/25/2001 | v1.1.0.0 |
| 017 | Clarify the sign convention for shear in the User Manual | 09/18/2001 | v1.1.0.0 |
| 016 | Investigate flange splice design moment to determine if it should be computed by subtracting the web design moment | 09/18/2001 | v1.1.0.0 |
| 015 | Investigate why under certain conditions output does not include bearing information even when activated on OSC command. | 09/15/2001 | v1.1.0.0 |
| 014 | Add input checks to verify edge and end distances consistency checks | 07/13/2001 | v1.1.0.0 |
| 013 | AASHTO Section C6.13.6.1.4b - Revise program to calculate bolt bearing capacity based on the inclined distance of the resultant bolt force. | 05/08/2001 | v1.1.0.0 |
| 012 | DM-4 2000 - Update factored bolt resistance calculation | 05/03/2001 | v1.2.0.0 |
| 011 | Investigate gage distance code failure reported for staggered bolt patterns | 05/03/2001 | v1.1.0.0 |
| 010 | Add a special copyright notice for beta test versions of the program. | 02/15/2001 | v1.1.0.0 |
| 009 | Pause the program when the run is complete to prevent the DOS window from closing automatically | 02/15/2001 | v1.1.0.0 |
| 008 | Activate additional compiler settings to prevent divide by zero errors | 02/15/2001 | v1.1.0.0 |
| 007 | Revise design moment distribution between DC1, DC2, FWS and LL for specific input file run. | 01/19/2001 | v1.1.0.0 |
| 006 | Support Windows 2000 | 01/11/2001 | v1.1.0.0 |
| 005 | Permit input files to be stored in other directories than the program files. | 01/11/2001 | v1.1.0.0 |
| 004 | Update PENNDOT's address for User Manual Chapter 9 & add contact person e-mail address | 01/11/2001 | v1.1.0.0 |
| 003 | Use a different extension (other than .PDF) for parameter definition file | 01/11/2001 | v1.1.0.0 |
| 002 | Support 4 digit years on output | 09/24/1999 | v1.1.0.0 |
| 001 | Convert to Compaq Visual Fortran Compiler | 09/24/1999 | v1.1.0.0 |